[:ru]EP1100 Series (1.2-2.4KVA)[:en]EP1100 Series (1.2-2.4KVA)[:]

Категории: 

[:en]EP1100 720W 1440W modifed sine wave inverter applied to TV, stereos, laptop and desktop computers and other home appliance.It will automatically transfer to inverter and provide power when AC supply is interrupted unexpectedly.

ep1100-1-1

LCD/LED Display Information

1. LCD DISPLAY
2. FAULT LED
3. INVERTER MODE LED
4. MAINS MODE LED
5. POWER ON/OFF

 

ep1100-2-1

Figure 1 Back Panel Information

6. DC Input Connector (Battery Terminal)
7. Input Voltage Range Selector: Input voltage range is defined in specification chapter, and output voltage is the same as input voltage in ‘mains’ mode
8. AC Input
9. Output Receptacle(s)
10. Charge Current Selector: 10A/20A adjustable

Inverter Connection

  • Charge current 10A/20A adjustable.
  • Double layers PCB board.
  • Compact size for convenient use.
  • Three-steps intelligent charge controller.
  • With Battery Reverse Protection Function (Optional).
  • Home use, for DVD, TV, Lights, and Fans.
  • With battery cable 10AWG 60cm

 

MODEL EP11-1200 EP11-1800 EP11-2400
Default Battery System Voltage 12VDC 12VDC 24VDC
INVERTER OUTPUT Rated Power 1200VA/720W 1800VA/1000W 2400VA/1440W
Waveform Modifided Sine-wave
Nominal Output Voltage RMS 230V
Output Voltage Regulation +10/-18%
Output Frequency 50Hz/60Hz +/-0.5 Hz
Inverter Efficiency(Peak) >80%
Line Mode Efficiency >95%
Power Factor 0.6
Typical Transfer Time Typical  15~20ms  40ms max
AC INPUT Voltage 230VAC
Selectable Voltage Range Narrow 170~280VAC
Wide 90~280VAC
Frequency Range 50Hz/60Hz (Auto sensing)
BATTERY Nominal Input Voltage 12VDC 24VDC
Minimum Start Voltage 10.5VDC 21.0VDC
Low Battery Alarm 10.5VDC+/-0.3V 21.0VDC+/-0.3V
Low Battery Cutoff 10.0VDC+/-0.3V 20.0VDC+/-0.3V
High Voltage Alarm 16.0VDC+/-0.3V 32.0VDC+/-0.3V
High Battery Voltage Recover 15.0VDC+/-0.3V 30.0VDC+/-0.3V
CHARGER Charger  Voltage (Vbat<12.5V) 14.4VDC+/-0.4V 28.8VDC+/-0.4V
Charger  Voltage (Vbat>12.5V) 13.7VDC+/-0.2V 27.4VDC+/-0.2V
Charging Current  10A 10A±2A
Charging Current  20A 20A±2A
Overcharge Protection S.D. 16VDC ±0.4A 32VDC ±0.8A
BYPASS
& PROTECTION
Nominal Input Frequency 50Hz or 60Hz
Overload Protection (SMPS Load) FUSE
Output Short Circuit Protection FUSE
Bypass Fuse Rating 10A
Max Bypass Current 10Amp
MECHANICAL SPECIFICATIONS Dimensions (W*H*D) 253*267*90mm
Net Weight (kg) 2.3 2.5
Shipping Dimensions(W*H*D) 319*328*123mm
Shipping Weight (kg) 2.9 3.1
OTHER Operation  Temperature  Range 0°C to 40°C
Audible  Noise 60dB MAX
Display LED+LCD
Standard Warranty 1 year
Loading(20GP/40GP/40HQ) 1800pcs  /   3600pcs   /   4200pcs

Approximate Back-Up Time Table

Power Rate(w) backup time(H)
@1*100Ah
backup time(H)
@2*100Ah
backup time(H)
@4*100Ah
backup time(H)
@4*200Ah
720 1.4 2.8 5.6 11.2
1000 0.9 1.9 3.8 7.5
1400 1.4 2.8 5.6

[:]

Комментарии закрыты.